Generiske krav

Tilgængelighedskrav i relation til webtilgængelighedsloven for kapitel 5 i EN 301 549 version 3.2.1

De relevante krav i relation til webtilgængelighedsloven findes i bilag A i EN 301 549 version 3.2.1. Bilag A består af to tabeller, som oplister krav, der er relevante for henholdsvis websteder (tabel A.1) og mobilapplikationer (tabel A.2).

Hvert krav indeholder et direkte udtræk fra EN 301 549 version 3.2.1 og et link dertil.

Krav for websteder og mobilapplikationer

Where ICT has documented accessibility features, it shall be possible to activate those documented accessibility features that are required to meet a specific need without relying on a method that does not support that need.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT uses biological characteristics, it shall not rely on the use of a particular biological characteristic as the only means of user identification or for control of ICT.

NOTE 1: Alternative means of user identification or for control of ICT could be non-biometric or biometric.

NOTE 2: Biometric methods based on dissimilar biological characteristics increase the likelihood that individuals with disabilities possess at least one of the specified biological characteristics. Examples of dissimilar biological characteristics are fingerprints, eye retinal patterns, voice, and face.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT converts information or communication it shall preserve all documented non-proprietary information that is provided for accessibility, to the extent that such information can be contained in or supported by the destination format.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Krav særligt for mobilapplikationer

Where ICT has operable parts that require grasping, pinching, or twisting of the wrist to operate, an accessible alternative means of operation that does not require these actions shall be provided.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT has operable parts, it shall provide a means to discern each operable part, without requiring vision and without performing the action associated with the operable part.

NOTE: One way of meeting this requirement is by making the operable parts tactilely discernible.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT has a locking or toggle control and that control is visually presented to the user, the ICT shall provide at least one mode of operation where the status of the control can be determined either through touch or sound without operating the control.

NOTE 1: Locking or toggle controls are those controls that can only have two or three states and that keep their state while being used.

NOTE 2: An example of a locking or toggle control is the "Caps Lock" key found on most keyboards. Another example is the volume button on a pay telephone, which can be set at normal, loud, or extra loud volume.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT has a locking or toggle control and the control is non-visually presented to the user, the ICT shall provide at least one mode of operation where the status of the control can be visually determined when the control is presented.

NOTE 1: Locking or toggle controls are those controls that can only have two or three states and that keep their state while being used.

NOTE 2: An example of a locking or toggle control is the "Caps Lock" key found on most keyboards. An example of making the status of a control determinable is a visual status indicator on a keyboard.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT has a key repeat function that cannot be turned off:

  1. the delay before the key repeat shall be adjustable to at least 2 seconds; and
  2. the key repeat rate shall be adjustable down to one character per 2 seconds.
© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT has a keyboard or keypad, the delay after any keystroke, during which an additional key-press will not be accepted if it is identical to the previous keystroke, shall be adjustable up to at least 0,5 seconds.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]

Where ICT uses simultaneous user actions for its operation, such ICT shall provide at least one mode of operation that does not require simultaneous user actions to operate the ICT.

NOTE: Having to use both hands to open the lid of a laptop, having to press two or more keys at the same time or having to touch a surface with more than one finger are examples of simultaneous user actions.

© ETSI 2021. All rights reserved

Læs klausulen i EN 301 549 version 3.2.1 [engelsk]